Baldor D2510P 0259AT, 10HP, 1750RPM, 240, 300, TEFC, F1 ELECTRICAL TERMINALS

Baldor D2510P 0259AT, 10HP, 1750RPM, 240, 300, TEFC, F1 ELECTRICAL TERMINALSSpecs Armature Voltage 240 V Base Speed 1750 rpm Enclosure TEFC Field Voltage 300 V Frame 259AT Frame Material Steel Output Power 10. 000 HP Agency Approvals CSA Ambient Temperature 40 C Armature Current 34. 3 a Base Indicator Rigid Bearing Grease Type Polyrex EM ( 20F +300F) Drip Cover No Drip Cover Duty Rating CONT Feedback Device NO FEEDBACK Field Winding Type STR. SHUNT Heater Indicator No Heater Insulation Class F Lifting Lugs Standard Lifting

Frame Material Rolled Steel Number of Poles 04 Insulation Class B Duty Cycle S1 Regreasing System Without Terminal Block Without Shaft Material CRS C1117/1040 Bolt Material Carbon Steel Balancing Method 1/2 Key Drip Cover Without Overload protector (phenolic) Manual Downloads

0 a Heater Indicator No Heater Insulation Class H Inverter Code Inverter Duty IP Rating NONE KVA Code F Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Termination Flying Leads Motor Type 1266M Mounting Arrangement F1 Number of Poles 2 Overall Length 29

5 VOLTS 115/230 AMP 13/6

23 A LRC 4

incorporated Temperature -10 °C a 50 °C USB port Only with plug-in Memory card Not included in the product I/O standard 4 x DI

15 STARTCAPMFD N\A SHIPPING WEIGHT 225 BREAKDOWN TORQUE 239 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 268 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER G LOCKED ROTOR AMPS 420

0846 Ohms A Ph / 0 Ohms B Ph Temp

Catalog Number AOM3542 Enclosure TEAO Frame 56 Frame Material Steel Frequency 60

G XP Division Division I Agency Approvals CSA EEV UL Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Constant Torque Speed Range 6 Current @ Voltage 7

0933 ohms Armature Inductance 0

Model_Number AD07E3215310012 PRODUCT NAME 0 HP - - 0 VOLTS PRIMARY

Standard NEMA MG-1 Frequency 60 Hz Voltage 575 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 30 HP Mounting F-2 Flange Without Terminal box¹ Right position Enclosure IC411 - TEFC Electric Motors