Bando P34-14M-115 HT QD Timing Belt Pulley (SK) 4.4 InchBando P34 14M 115 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
Rise @ Rated Load 60° C Start Configuration DOL Break-Down Torque 11
69 LB-FT Starting Current 9
1 POLES 6 NUMBER SPEEDS 1 RPM 1125 HERTZ 60 VOLTS PRIMARY 208-230 V VOLTS 208 VOLTS 2 230 FRME 48 SHAFT CODE Y STATOR DIAMETER 5
33 VOLTS 115/230 AMP 6/3 RPM 1725 FRAME 56C SER
3 SERVICE FACTOR AMPS PRIMARY 8 Technical Data
Catalog Number M3108-57 Enclosure OPEN Frame 56 Frame Material Steel Frequency 50
UL approval UL1077 Trip curve D Number of poles 3 poles Rated current 5 A Maximum voltage 277/480 VAC Type Thermal-magnetic Attributes
lb Locked rotor torque 280 % Breakdown torque 290 % Locked rotor time 12s (cold) 7s (hot) Moment of inertia (J) 0
Bando - RPF5320 Molded notch design gives extra flexibility to reduce heat build-up and provide long belt life
lb Locked rotor torque 240 % Breakdown torque 229 % Locked rotor time 27s (cold) 15s (hot) Moment of inertia (J) 5
15 STARTCAPMFD N\A SHIPPING WEIGHT 145 BREAKDOWN TORQUE 296 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 177 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER G LOCKED ROTOR AMPS 81 NEMA NOMINAL EFFICIENCY 91 FULL LOAD AMPS PRIMARY 26
6 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating NONE KVA Code J Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 1800 rpm Motor Lead Termination Flying Leads Motor Type 0954M Mounting Arrangement F1 Number of Poles 6 Overall Length 25
