90MM X 5MM Boss

90MM X 5MM BossThis steel bucket pin shim is for a pin with an outer diameter of 90 mm. It is 5 mm thick with an OD of 160 mm. Perfect for when you have space between your bucket ears and your machines hook up. Too much of a gap will cause your Bucket to wobble or chatter around on your machine causing wear and tear on your pins and bushings. A bucket pin shim will work just fine if it is a little larger than the Outer Diameter of your pin but not if it is smaller

2 long bolts

NARROW CHISEL A22014 1X41/4 SHANK

This is a Hensley style xs10syl general purpose bucket tooth

Dust seal for 40mm Bucket Pin/Boss that measures 40mm x 50mm x 4mm also known as Kom-07145-00040

This is a cat j225 series style twin tiger bucket tooth with industry standard part number of 6y3222

11" BRUNNER AND LAY

This is a V23Syl Esco style Super V bucket tooth

This is a V23pn Esco style Super V pin

This Pin Removal Tool is used to remove pins from bucket teeth

DRI DUCK 7033 crossfire power fleece hooded zip up sweatshirt

This is a cat j225 series style single tiger bucket tooth with industry standard part number of T6y3222L also 6y7229

This Reducer is used to shrink the size of the round hole in your bucket lip (base edge) from a 3/4" bolt to a 5/8" bolt