Bando P90-14M-40 HT QD Timing Belt Pulley (E) Draft Inducer BlowersBando P90 14M 40 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
83 % Rated voltage 575 V Rated current 332 A L
lb Locked rotor torque 160 % Breakdown torque 229 % Locked rotor time 64s (cold) 36s (hot) Moment of inertia (J) 23
05E811X549G1 HP 2 TE VOLTS 460 AMPS 2
Packard80428
00 % Rated voltage 400 V Rated current 225 A L
300 A @ 380
875 IN Shaft Ground Indicator Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 3450 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
Model_Number HE45 PRODUCT NAME 10 HP - TEFC - 1180 PHASETYPE 3_PHASE MOTOR ENCLOSURE TEFC HORSEPOWER 10 KILOWATTS 7
Number of Ribs4
Model_Number J063BKB0191015B PRODUCT NAME 2 HP - OAO - 1140 PHASETYPE 3_POLYPHASE MOTOR ENCLOSURE OAO HORSEPOWER 2 KILOWATTS 1
64 LB-FT Locked-Rotor Torque 13
375 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 3495 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
