Bando 3M250 Banflex S4.5M

Bando 3M250 Banflex S4.5MBando 3M250 The small cross section of the BanFlex belts makes them the preferred choice where short center distances and small diameter sheaves are required on compact equipment designs. The 60 sidewall angle and precision molded, seamless construction allows for precise belt to sheave meshing in high speed applications up to 10,000 RPM. Precision cast, seamless polyurethane body for maximum power transmission capability at high speeds. Polyester

35 A Rated torque 3

Bando - 100-DS2M-752 Synchro-Link® Double Sided Timing Belts provide smooth

Weight (lbs)19

875 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1740 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding Do Not Use Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 Manual Thermal Overload Winding Thermal 1 Location KO Winding Thermal 2 None Drawings

1 LB-FT Locked-Rotor Torque 11 LB-FT Starting Current 15 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

Nominal Outside Length (mm)1435

90 A Rated torque 8

GE5KCP39GGY022

625 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Speed 1765 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3C Drawings

35V814G155G1 HP

05E811X259G1 HP 1 TE VOLTS 460 AMPS 1

7x(Code J) No load current 50