Bando 1130H075G H Timing Belt 14MBando 1130H075G The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt, and moisture. Continuous, helically wound high strength fiberglass tensile cords guarantee dimensional stability to eliminate take up adjustments. Heavy torque loads wont fatigue this super strong cord.
0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty KVA Code F Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Exit Ko Box Motor Lead Termination Ring Terminals Motor Lead Quantity/Wire Size 3 @ 10 AWG Motor Type 1056M Mounting Arrangement F1 Number of Poles 4 Overall Length 28
7 VOLTS 230 RPM 1800 HZ 60 BEMF (V) 126 LD (MH) 13
15 STARTCAPMFD N\A SHIPPING WEIGHT 175 BREAKDOWN TORQUE 282 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 200 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER G LOCKED ROTOR AMPS 62
Standard NEMA MG-1 Frequency 60 Hz Voltage 460 V Number of poles 12/6 Degree of Protection IP55 Synchronous speed 600/1200 rpm Output rating 6
56 IN Power Factor 77 Product Family General Purpose Pulley Face Code Standard Rodent Screen None RoHS Status ROHS NON-COMPLIANT Service Factor 1
35-0000-0934 FRAME 145TC HP 5 NOM
2 POLES 4 NUMBER SPEEDS 1 RPM 1785 HERTZ 60 VOLTS PRIMARY 575 VOLTS 575 FRME 405 SHAFT CODE TS MOUNTING HORZ-FOOTED MOTOR TYPE FR OPPOSITE END BEARING 6212-2Z-J SHAFT END BEARING 6215-2Z-J AMBIENT 40 SERVICE FACTOR 1
7 % Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK High Voltage Full Load Amps 29
Model_Number 646592 PRODUCT NAME KIT
Amperage57
lb Locked rotor torque 220 % Breakdown torque 250 % Locked rotor time 16s (cold) 9s (hot) Moment of inertia (J) 79
375 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Phase Seq-Std Rot (CCWODE) Shaft Slinger Indicator No Slinger Speed 1780 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None XP Temp Code T3 Drawings
