200x200mm 120v/220v 200W Silicone Heated Bed Heating Pad With Hole For 3D Printer 3Dpen

200x200mm 120v/220v 200W Silicone Heated Bed Heating Pad With Hole For 3D Printer 3DpenFeatures: Wonderful silicone heater for your 3D printer heat bed. Adhesive backing offers excellent and easy mounting. This pad heats up quickly. Please handle with care. Specifications: Main Color: OrangeMaterial: Silicone Rubber (with adhesive backing)Size: 200mm x 200mmWhite Line Length: About 50cmRed Line Length: About 93cmVoltage: 120v 220vPower: 200WContinue to use working temperature should be less than 240 , Instantaneous does not exceed 300

Right HandPackage Include:1 X 3D Extruder Accessorie1 X Bag of Fitting

-The action(Pull or push push-pin hard) makes damage and lowers the accuracy of sensorPackage Included:1 X Sensor1 X 3Pin Straight Pin1 X 2Pin Straight Pin 2 X Screw & Nut & Washer2 X Dupont Housing Shell 3Pin2 X Dupont Housing Shell 2Pin    10X Dupont Terminal1 X 10KΩ 1/8W Resistor for SmoothieboardHere are more info

Specifications: - Extruder Gear Inner Bore: 5mm

Amf Printing Method SD card(off-line)

easily operate

Fan1: Connect the second hotend throat cooling fan (the fan starts working when the second hotend is heated or the temperature is above 40 degrees Celsius)

A4988 Stepper Motor Driver: Color: Red Size (L*W*H): 20 x 15 x 10 mm Thermal shutdown circuitry: Yes Crossover-current protection: Yes Ground fault protection: Yes Load short-circuit protection: Yes Compatible logic supply: 3

but can print with two different filaments simultaneously

at the same system power

For more details

manufacturers

with sound prompts