Century FD6000 MASTERFIT Fan and Blower Motor, 1/2 MAX HP, 1 Ph, 60 Hz, 208-230 V, 1075 RPM, 4 Speed, 48 Frame, OPEN Elevators

Century FD6000 MASTERFIT Fan and Blower Motor, 1/2 MAX HP, 1 Ph, 60 Hz, 208-230 V, 1075 RPM, 4 Speed, 48 Frame, OPEN ElevatorsMasterFit Direct Drive Fan & Blower Motor 5. 6" Diameter 48 Frame Permanent Split Capacitor (PSC); Capacitor Required: 10 or 5 Mfd 370 Volts (Supplied with Motor) Thermally Protected Open Air Over Class B Insulation, 40C Ambient Design Upgrade, Converting From Sleeve Bearing to Ball Bearing 1 2" Diameter Shaft with Flat 36" Leads with Quick Connect Terminals Extended Studs Shaft End, Resilient Ring Mounting, Mounting Holes in Shell, Belly Band Mount

6 BREAKDOWN TORQUE UOM OZFT LOCKED ROTOR TORQUE 209

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CULUS CCSAUSEEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Current @ Voltage 167

50 % Rated voltage 190/380 V Rated current 10

Load 56° C Start Configuration DOL Break-Down Torque 314 LB-FT Pull-Up Torque 119 LB-FT Locked-Rotor Torque 174 LB-FT Starting Current 162 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

6x(Code J) No load current 161 A Rated torque 1060 ft

85 IN Power Factor 69 Product Family General Purpose Product Type BRAKE MOTOR Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1

75 MOTOR TYPE FHP OPPOSITE END BEARING 6203 SHAFT END BEARING 6203 AMBIENT 40 ROTATION CW LEAD END SERVICE FACTOR 1

Model_Number AF92 PRODUCT NAME 10 HP - DP - 3500 PHASETYPE 1_PHASE MOTOR ENCLOSURE DP HORSEPOWER 10 POLES 2 NUMBER SPEEDS 1 RPM 3500 HERTZ 60 VOLTS PRIMARY 230 VOLTS 230 FRME 215 SHAFT CODE T ASSEMBLY POSITION F-1 MOTOR TYPE DM OPPOSITE END BEARING 6205-2Z-J/C3 SHAFT END BEARING 6208-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1

Amperes 762 A LRC 8

Insulation ClassH

5 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating NONE KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 5400 rpm Motor Lead Termination Flying Leads Motor Type 0950M Mounting Arrangement F1 Number of Poles 2 Overall Length 26

15 STARTCAPMFD N\A SHIPPING WEIGHT 350 BREAKDOWN TORQUE 256 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 194 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER F LOCKED ROTOR AMPS 208 NEMA NOMINAL EFFICIENCY 94