Strat Humbucker Single Single - Dark Brown Celluloid Tortoiseshell White/Black/White 4 ply Lamination 15-1-gear-ratio

Strat Humbucker Single Single - Dark Brown Celluloid Tortoiseshell White/Black/White 4 ply Lamination 15-1-gear-ratioThis replacement Fender Strat H S S pickguard's mounting hole pattern will only fit genuine Fender U. S. A (post 1963) or Fender made in Mexico (post 2002) Stratocasters with two single coils in the neck and middle position, and a standard humbucker in the bridge position located 3 8 inches from the bridge cutout. It will not fit Squier or any Fender production instruments from Korea, Japan, Indonesia or China manufacturing facilities. This pickguard

They will not fit the Nashville-style of Tune-O-Matic bridge or an original 50's or 60's ABR-1 that were fitted to a Kalamazoo-made Gibson guitar

8 Metric (as used by Gibson on Nashville Models)Post to Post Spacing = 2

Bridge centre to centre mounting hole spacing = 2

this template is specifically for the model that uses 1 x DiMarzio custom single coil in the middle and 2 x DiMarzio Virtual PAF Humbuckers for neck and bridge

Comes with aged white pickup covers

'64 Vibroverb‚®

This pickguard will only fit genuine Fender Telecaster Cabronitar

centre to centre distance between posts - 1 3/8 in

The stock sustain block is 8

Bridge center to center spacing - 2

Original "Beefed up" - The specification is similar to the original MB-1's but we have "beefed it up" a little bit as the originals were a little lacking in "eumph"

one mount hole the other)