Fasco K112 1/50 HP C-Frame / Skeleton Motor, 3000 RPM, 2 Speed, 120 Volts, , OAO Carbonator Pumps

Fasco K112 1/50 HP C-Frame / Skeleton Motor, 3000 RPM, 2 Speed, 120 Volts, , OAO Carbonator PumpsHeating Refrigeration Ventilating Motor C Frame Shaded Pole Thermally Protected, One Shot Fuse Open Air Over Class B Insulation, 40C Ambient Sleeve Bearing . 1811" Diameter Shaft 4. 75" 3. 75" Leads with Molded Plug Extended Studs Opposite Shaft End Additional Information Thermal ProtectionThermally Protected Speed3000 rpm Current. 86 . 44 A Number of Speeds2 Ambient Temperature40 C ULRecognized Insulation ClassB CSAN Weight2. 10 LB Country Of

3 LB-FT Pull-Up Torque 19

8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3526M Mounting Arrangement F1 Number of Poles 6 Overall Length 13

6 POLES 4 NUMBER SPEEDS 1 RPM 1725 RPM 2 1425 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 115/230 V VOLTS 115 VOLTS 2 230 FRME 56 SHAFT CODE Z STATOR DIAMETER 6

1 POLES 2 NUMBER SPEEDS 1 RPM 3570 RPM 4 2955 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 460 VOLTS 460 VOLTS 4 380 FRME 444 SHAFT CODE TS MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE RE OPPOSITE END BEARING 6313-J SHAFT END BEARING 6313-J AMBIENT 40 SERVICE FACTOR 1

7 POLES 4 NUMBER SPEEDS 1 RPM 1750 RPM 2 1750 HERTZ 60 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 FRME 184 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE LE OPPOSITE END BEARING 6205-J/C3 SHAFT END BEARING 6206-J/C3 AMBIENT 40 SERVICE FACTOR 1 STARTCAPMFD N\A SHIPPING WEIGHT 110 INSULATION CLASS F KVA CODE LETTER J NEMA NOMINAL EFFICIENCY 89

Model LT3-UBW225 Application Molded-case circuit breaker Product line UBW225 Type Standard Number of conductors 1 Wire size (AWG/kcmil) 14-4/0 Number of lugs 3 Rated voltage 600 Attributes

Amperes 1536 A LRC 6

0x(Code J) No load current 11

5 CT HZ 15-60 CHP HZ 60-90 GREASE POLYREX EM ABMA DE BRG 65BC03J30X Performance

D XP Division Division II Agency Approvals CCSAUSEEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Constant Torque Speed Range 6-60 Current @ Voltage 138

Amperes 547 A LRC 6

D XP Division Division II Agency Approvals CCSA US CSA EEV NEMA PREMIUM NEMA_PREMIUM UR Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Constant Torque Speed Range 2 Current @ Voltage 1